Carolina Attachments Extreme Root Grapple
$3,100.00 - $3,799.00
Carolina Attachments Extreme Root Grapple
The extreme root grapple is recommended only for machines 80HP and above. This is the strongest root grapple available anywhere, designed to stand up to the harshest conditions of everyday commercial use.
*4" sq tube frame
*all 5/8" steel construction
*opens 36"
*hoses routed through sq tubing
*HD cylinder and shaft cover included
*safety step
*American made 2' x 10" cylinders
*Parker hoses
*grease zerks at all pivot point
*includes all hoses and couplers
*powder coated
*1 year warranty
***$399 Flat Rate Shipping***
Flat rate shipping does NOT apply to the following locations: CA, WA, OR, MT, ND, SD, AZ, NM, CO, ID, UT, WY, AK, HI, UPPER PENINSULA, LONG ISLAND. For a quote to the areas please send us a message with your zip code.
HD Flat Bottom Root Grapple
$2,699.00 - $3,399.00
Why a flat bottom over a traditional root grapple style? Simple! The flat bottom makes it easier to move brush and trees. The flat bottom design allows you to shove the grapple under a tree or log, without having to roll the grapple forward as with traditional style root grapples.
Brand New Built in the NC by hard working Americans HD Root Grapple Highest quality Construction - BUILT IN THE USA High Strength Seel. These grapples have been in production for many years, designed especially for large horsepower skid steers and compact track loaders.
☆all A36 1/2" USA steel (bottom tines, bucket sides, back bracing《others use 3/8" back bracing》 & top tines)
☆4" A36 square tube frame (1/4" wall)
☆2" x 10" USA made hydraulic cylinders
☆4,500psi cylinders
☆NEW FOR 2019 grease zerk protection rings on cylinders
☆5,800 psi Parker brand AMERICAN made hydraulic hoses
☆right angle stucci hydraulic couplers (easier to hook up)
☆grease zerks at all pivot points
☆1" solid pins and DOM bushings at all pivot points
☆pins bolted in (not cheap pin tabs or roll pins)
☆serated tines to grip brush & logs
☆opens 36"
☆3" schedule 40 round pipe front bracing
☆bottom tines spaced approx 9" on center
☆HD cylinder cover included
☆nylon hose sleeves on ALL hoses
☆parker tough cover hoses (highest quality parker hose made)
☆cylinder hoses routed through square tubing makes tears nearly impossible
☆powder coated
☆1 year warranty
☆☆☆Free shipping does not apply to the following States: CA, WA, OR, AK, HI, MT, WY, ID, NM, NV, AZ, ND, SD, LONG ISLAND, UPPER PENINSULA OF MI. For a shipping quote to these areas, please message us or comment below with your zip code.☆☆☆
Carolina Attachments HD Root Grapple
$2,800.00 - $3,399.00
These grapples have been in production for many years, designed especially for large horsepower skid steers and compact track loaders.
Don't fall for other dealers claiming American made, when the items they're selling use Chinese cylinders, hoses and other components.
☆all A36 1/2" USA steel (bottom tines, bucket sides, back bracing《others ise 3/8" back bracing》 & top tines)
☆4" A36 square tube frame (1/4" wall)
☆2" x 10" USA made hydraulic cylinders
☆4,500psi cylinders
☆NEW FOR 2019 grease zerk protection rings on cylinders
☆5,800 psi Parker brand AMERICAN made hydraulic hoses
☆right angle stucci hydraulic couplers (easier to hook up)
☆grease zerks at all pivot points
☆1" solid pins and DOM bushings at all pivot points
☆pins bolted in (not cheap pin tabs or roll pins)
☆serated tines to grip brush & logs
☆opens 36"
☆3" schedule 40 round pipe front bracing
☆bottom tines spaced approx 9" on center
☆HD cylinder cover included
☆nylon hose sleeves on ALL hoses
☆parker tough cover hoses (highest quality parker hose made)
☆cylinder hoses routed through square tubing makes tears nearly impossible
☆powder coated
☆1 year warranty
☆☆☆NO ADDITIONAL CHARGES FOR RESIDENTIAL/FARM DELIVERY (OTHER DEALERS CHARGE $75-$150 FOR THIS SERVICE☆☆☆
☆☆☆NO ADDITIONAL CHARGES FOR LIFTGATE SERVICE☆☆☆
☆☆☆IMPORTANT SHIPPING INFO☆☆☆
Flat rate ($299) shipping does NOT apply to the following states: CA, WA, OR, AZ, NM, CO, ND, SD, MT, WY, ID, AK, HI, NV. For a shipping quote to these states please send us a message with your zip code.
Carolina Attachments Standard Root Grapple(medium duty)
$2,400.00 - $2,799.00
Designed for tractors and skid steers up to 60HP, the medium duty root grapple is perfect for those smaller to mid sized machines being used commercially, without restricting lift capacity.
*4" sq. tube frame
*all 3/8" steel construction
*opens 36"
*hoses routed through sq tubing
*HD cylinder cover (shaft cover optional)
*safety step
*American made 2" x 10" cylinders
*Parker brand hoses
*grease zerks at all pivot points
*includes all necessary hoses and couplers
*powder coated
*1 year warranty
***$299 Flat Rate Shipping***
Flat rate shipping does NOT apply to the following locations: CA, WA, OR, MT, ND, SD, AZ, NM, CO, ID, UT, WY, AK, HI, UPPER PENINSULA, LONG ISLAND. For a quote to the areas please send us a message with your zip code.
LD Root Grapple
$1,550.00 - $1,999.00
These are light duty grapples, designed for smaller machines and non-commercial use. These work great around the home/farm.
Built in NC. CURRENTLY ONLY AVAILABLE IN BLACK FOR THE FORESEEABLE FUTURE.
Made in USA!
*3" sq. tube frame
*3/8" A36 steel plate
*9" bottom tine spacing
*parker hydraulic hoses (3045psi)
*hd cylinder covers included
*dual 2" x 8" 3000psi AMERICAN made cylinders
*hose protection sleeve included
*universal skid steer hook up, fits 99% of skid steers and tractors
*comes complete, needs nothing, hook up and use as soon as you receive it
*weighs 550-600lbs depending on size
336-870-2257
Shipping to the lower 48 states only! Shipping at the listed flat rate of $149 excludes the following states: WA, CA, OR, MT, WY, ID, ND, SD, AZ, NM, NV, AK, HI, CO, LONG ISLAND, UPPER PENISULA. For a shipping quote to these states, please comment or message us with your zip code.
LD Root Grapple w/JD Hookup
$1,332.00 - $1,645.00
This is the most popular root grapple we sell designed to work with JD tractors. This grapple comes with the JD 200-500 series hook up. It will work with all JD loaders that use the standard JD quick attach, a hook at the top and pin on bottom. We usually always have the 72" model of this grapple in stock ready to ship.
*3" sq tube frame
*all 3/8" steel construction
*HD cylinder cover included
*opens approx 26"
*2' x 8" American made cylinder
*Parker brand hoses
***$149 Flat Rate Shipping***
Flat rate shipping does NOT apply to the following locations: CA, WA, OR, MT, ND, SD, AZ, NM, CO, ID, UT, WY, AK, HI, UPPER PENINSULA, LONG ISLAND. For a quote to the areas please send us a message with your zip code.
Single Cylinder LD Root Grapple for JD
$1,179.00 - $1,408.00
48" Root Grapple to fit John Deere Loaders
Tired of buying products that claim to be USA made and have chinese hydraulic cylinders and hoses? This product uses AMERICAN made cylinder, hoses, steel, etc... and is designed to work perfectly with the John Deere subcompact to midsize tractors.
*2" x 8" AMERICAN made hydraulic cylinder
*Parker brand hydraulic hoses (USA made)
*3/8" A-36 AMERICAN steel plate
*AMERICAN made 3" square tube frame
*3" square tube bracing on top tine (cheaper brands use 1.5"-2" sq tubing)
*bottom tines spaced 9"
*1" thick cylinder mounts (stronger than others to prevent twisting and breaking)
*3" round pipe front bracing
*3/8" steel gussets on all bottom tines
*serrated bottom tines for extra gripping strength
*grapples come with pioneer style hydraulic couplers included
*weight: 325lbs
*NO ADDITIONAL CHARGES FOR RESIDENTIAL/FARM DELIVERY
***TOP PIN FITS: H120, D120, 210, 200X, 200CX, 300CX, 305, 400X, 400CX, 410, 419, 420, 430, 440 & 460 JD loaders
***BOTTOM PIN FITS: 500, 510, 520, 521, 540, 541, & 542 JD loaders
***This grapple will fit any standard JD quick attach that uses the hook on top and pin on bottom style hookup. DOES NOT FIT EURO HOOKUP***
We ship to any address in the lower 48 states! Flat rate shipping does not apply to the following states: CA, WA, OR, WY, MT, UT, AZ, NM, CO, ND, SD, NV, ID. For a quote to those states please send us a message with your zip code.