XBC-3 Brush Cutter
The skid steer rotary brush cutter (XBC-3) made in Thomasville, NC by Carolina Attachments, LLC works great for around the home and farm. These cutters are perfectly designed for overgrown fields and pastures. Cut through thick grass, briars, and brush like a hot knife through butter!
DON'T OVERPAY FOR SHIPPING WITH OTHER DEALERS, WE NEVER CHARGE ADDITIONAL FOR RESIDENTIAL/FARM DELIVERY!
$299 Flat rate shipping
*Designed to work with skid steers up 20GPM
*11-20 gpm hydraulic flow required
*easily replaceable rotary cutter style blades
*HD stump jumper
*omni RC30 gear box
*cuts up to 3" diameter trees and saplings
*includes hydraulic hoses and couplers
*open front design with HD push bar
*3/16" solid steel (A-36) deck with reinforced sides.
*HD motor covers protects the hydraulic motor and gear box
*full 6' cutting width (deck is about 78" wide)
*weighs approx. 1,050 lbs.
*NO ADDITIONAL CHARGES FOR RESIDENTIAL DELIVERY!!!
***$299 Flat rate shipping does NOT apply to the following States: CA, WA, OR, CO, NM, AZ, AK, HI, WY, MT, ID, ND, SD, CO, UT.
XBC-4 Brush Cutter
XBC-4 BRUSH CUTTER
Flat Rate shipping--$299
This all new cutter uses the extremely popular XBC series deck (Xtreme Brush Cutter Deck) with the HD stump jumper and easily replacable rotary cutter style blades. This cutter works great around the home/farm. This cutter chews up small saplings and underbrush in no time.
☆4" diameter cutting capacity
☆11-20gpm flow required
☆omni gear box
☆HD motor cover
☆HD stump jumper
☆easily replaceable rotary cutter blades
☆3/8" x 3" steel inside deck bracing
☆3/16" A-36 steel deck
☆Parker tough cover hoses w/ protection sleeve
☆HD push bar
☆popular open front design
☆safety tread steps on both sides of deck
☆powder coated
☆6 month warranty
☆☆☆IMPORTANT SHIPPING INFO☆☆☆
Flat rate shipping ($299) does not apply to the following states: CA, WA, OR, MT, WY, ID, CO, AZ, NM, NV, AK, HI, ND, SD. For a shipping quote to these states please comment or message us with your zip code.
XBC-7 Brush Cutter
The XBC-7 extreme cutter is designed for everyday commercial use! This cutter works great for overgrown fields, shooting lanes, right-of-way maintenance, and commercial land clearing applications. Our customers have reported continually cutting 7" hardwoods and up to 12" softwood trees with no problems. Featuring a hi-speed Dynamic brand, direct drive hydraulic motor, this cutter is virtually maintenance free!!! Just hook up and cut. Made in NC, by hard working AMERICAN citizens, using AMERICAN made components.
☆massive 7"+ diameter cutting capacity
☆easily cut up to 7" hardwoods
☆NEW FOR 2020--7/16" TOTAL DECK SIDE THICKNESS
☆NEW FOR 2020--1/4" INNER DECK SIDE PLATING
☆NEW FOR 2020--HYDRAULIC HOSES ROUTED INSIDE ATTACHMENT FOR EXTRA PROTECTION
☆NEW FOR 2020--BOLT-ON REPLACABLE SKID SHOES
☆NEW FOR 2020--1/4" KICK PANEL IN REAR, DEFLECTS DEBRIS TOWARD GROUND AWAY FROM MACHINE
☆hi-speed direct drive hydraulic motor (no gearbox)
☆maintenance free oil filled bearing housing
☆wide flow range works on 99% of machines 16-26gpm
☆built in relief valve protects the motor and spindle
☆extreme duty 6-bolt spindle
☆doubled 3/8" AR400 steel blade carrier
☆5/8" x 6" AR400 hardened steel blades
☆3 blade design with integrated blade balancing, resulting in zero
vibration
☆welded wire wrap protection ring, prevents wire from wrapping around the
spindle
☆4,000 psi Parker brand hydraulic hoses
☆fully welded deck seams
☆all bracing has open ends to allow water to pass through, and not buildup causing rust
☆slotted front guard allows for increased visibility and protection
☆slotted HD motor cover allows air flow around the motor for cooling
☆safety steps on both sides of deck
☆AR400 hardened steel inside runner, ads strength and deck life by reducing
wear
☆waterproof owners manual tube included (manuals are emailed from manufacturer)
☆powder coated
☆1 year manufacturer's warranty
☆☆☆NO ADDITIONAL CHARGES FOR RESIDENTIAL DELIVERY!!! $299 FLAT RATE SHIPPING TO YOUR DOOR(lift gate delivery not included)☆☆☆
☆☆$299 SHIPPING DOES NOT APPLY TO SHIPPING TO THE FOLLOWING STATES: CA, WA, CO, OR, ND, SD, MT, WY, AK, HI, NV, NM, AZ, ID. PLEASE MESSAGE US FOR EXACT SHIPPING QUOTE☆☆
XBC-8 Brush Cutter
The XBC-8 extreme cutter is designed for everyday commercial use! This cutter works great for overgrown fields, shooting lanes, right-of-way maintenance, and commercial land clearing applications. Featuring a hi-speed and high-torque radial piston hydraulic direct drive motor. This cutter is virtually maintenance free!!! With the carbide mulching teeth, paired with the piston motor, this cutter will cut and shred trees and stumps up to 8" with ease! Just hook up and cut. Made in NC, by hard working AMERICAN citizens, using AMERICAN made components.
***beware of cutters being sold with mulching teeth that do not use a piston drive motor, they will not perform well. Standard direct drive motors do NOT have enough rpm's or torque to pull blades and mulching teeth***
☆☆☆The XBC8 has many different options available. Including, but not limited to, mid flow & high flow, deck thickness, hoses, hydraulic couplers, blades etc... specs listed below are standard features on the XBC8.☆☆☆
***SKID STEER BRUSH CUTTER, NOT DESIGNED FOR TRACTORS***
☆massive 8"+ diameter cutting capacity
☆easily cut up to 8" hardwoods
☆hi-speed & high-torque direct drive hydraulic motor (no gearbox)
☆wide flow range works on 99% of machines 17-27gpm (requires case drain)
☆12 carbide mulching teeth come standard
☆buit in relief valve protects the motor and spindle
☆safety H-valve, prevents you from accidentally reversing hydraulic flow while
running
☆extreme duty 6-bolt spindle
☆doubled 3/8" thick AR400 steel blade carrier
☆5/8" x 6" AR400 hardened steel blades
☆3 blade design with integrated blade balancing, resulting in almost zero
vibration
☆welded wire wrap protection ring, prevents wire from wrapping around the
spindle
☆4,000 psi Parker brand hydraulic hoses
☆fully welded deck seams
☆all bracing has open ends to allow water to pass through, and not buildup causing rust
☆slotted front guard allows for increased visibility and protection
☆slotted HD motor cover allows air flow around the motor for cooling
☆safety steps on both sides of deck
☆AR400 hardened steel inside runner, ads strength and deck life by reducing
wear
☆powder coated
☆1 year manufacturer's warranty
☆NO ADDITIONAL CHARGES FOR RESIDENTIAL DELIVERY!!!
*replacement blades are kept in stock at all times, full set (3 blades, nut, bolts and bushings) $250
*replacement carbide teeth are kept in stock at all times, full set costs $360*
$299 flat rate shipping
Flat rate shipping does NOT apply to the following locations: CA, WA, OR, MT, ND, SD, AZ, NM, CO, ID, UT, WY, AK, HI, UPPER PENINSULA, LONG ISLAND. For a quote to the areas please send us a message with your zip code.
SDXC-10 Brush Cutter
Brand new model brush cutter we are selling from Carolina Attachments.
This is the newest and latest addition to our brush cutter lineup. The SDXC-10 is in a class of it's own. With massive 10" cutting capabilities, and priced right!
Using the same style hydraulic motor as a drum mulcher, the parker bent axis piston motor produces extremely high blade speeds and torque. Combined with our new severe duty bearing housing, this is an unstoppable cutter, rivaled by no other brush cutter on the market.
As always, this Carolina Attachments product is 100% AMERICAN MADE.
☆MASSIVE 10" CUTTING CAPACITY
☆featuring Parker bent axis piston hydraulic motor
☆20-30gpm flow range
☆4 blade design
☆3/4" thick AR400 blades
☆carbide mulching teeth, 4 rows
☆new style 3 bolt blade mounting system
☆double layer 1/2" top & bottom blade holder
☆solid welded blade holder spacer
☆blade bolt access hole in deck(easily changeable blades)
☆mulching teeth bolt access holes in deck
☆severe duty 8 bolt blade holder mounting flange
☆massive 5" diameter solid hardened steel spindle
☆all new bolt on/replaceable 1/2" hardened steel skid shoes
☆3" square tube push bar bracing
☆1/4" wall square tube push bar
☆1/4" A36 solid steel deck
☆2" square tube attachment plate bracing
☆slanted rear deck corners deflects material downward away from machine
☆slotted motor cover aids in cooling and keeping fluid cool
☆safety step welded to deck and integrated on attach plate
☆3/4" high pressure parker brand hoses
☆open fron design aids in material cleanout
☆cuts to within 1/2" of ground level
☆sherwin williams powder coated finish
☆nylon hose protection sleeve
☆1 year warranty
☆☆☆SHIPPING INFO☆☆☆
Flat rate shipping $499, does NOT apply to the following states: CA, OR, WA, MT, WY, ND, SD, AZ, NM, ID, UT, CO, NE, IA, AK, HI, UPPER PENINSULA MI, LONG ISLAND NY.
Swing Brush Cutter
The swinging brush cutter works great for mowing pond/creek banks, trimming back field edges and fence rows and much more. This cutter uses the same high speed/high torque radial piston motor as the popular XBC8 brush cutter we sell. 100% made in USA by Americans!
$6,999 plus shipping
$399 flat rate shipping (some restrictions apply, listed at bottom of ad)
☆8' boom arm gains height and reach over. typical cutters
☆boom arm swing 90° right
☆head tilts 125°
☆3" x 16" USA made tilt cylinder
☆5/8" thick AR400 hardened steel blades
☆44" cutting width
☆4" diameter cutting capacity
☆3" solid steel hardened hinge pin
☆universal wiring harness or 8/14 pin plug included
☆HD slotted motor cover (allows air flow for cooling)
☆17-27gpm high speed/torque radial piston motor (requires case drain)
☆3" round pipe push bar
☆3/16" A36 steel deck
☆3/8" A36 steel deck bracing
☆3/8" double layer blade holder
☆6,000lb minimum machine required
☆all hoses come with protection sleeve
☆powder coated
☆1 year warranty
☆NO ADDITIONAL CHARGES FOR RESIDENTIAL/FARM DELIVERY
Standard color is gray. Orange, black, JD Green, and yellow available upon request.
$399 flat rate shipping does NOT apply to the following states: CA, WA, OR, AK, HI, AZ, NM, CO, WY, MT, NV, ID, Long Island, Upper Penisula, MI, ND, SD, For a shipping quote to these states please send us a message with your zip code.
CID Disc Mulcher
The popular disc mulcher, now available in standard and high flow, and two sizes! These things will shred 4"-6" trees in a matter of a couple seconds. These are designed for everyday commercial land clearing use. Everything is included, ready to hook up and go to work right off the truck.
☆☆☆44" disc mulcher specs☆☆☆
☆standard flow 20-30gpm
☆high flow 32-44gpm
☆44" solid machined disc (no welds for perfect balancing)
☆replaceable 4 sided quadco teeth
☆3/8" thick deck and sides
☆1" thick hinged deflector shield
☆cuts at or below ground level
☆30 mulching teeth
☆cuts 14" diameter trees
☆mulches up to 4" diameter trees
☆☆☆60" disc mulcher specs☆☆☆
☆high flow only with 2 motor options
☆replaceable 4 sided quadco teeth
☆fully machined disc
☆60" solid disc (no welds for perfect balance)
☆rated to cut 14" trees
☆mulch up to 6" trees in seconds
☆3/8" reinforced steel deck
☆includes all hoses and couplers
☆2 motor options availble (150cc & 200cc)
☆150cc requires 32-44gpm & 3200psi+
☆200cc requires 45-60gpm & 3200psi+
☆weighs approx. 2600lbs
☆powder coat finish
$399 flat rate shipping!
Flat rate shipping does NOT apply to the following states: CA, WA, OR, NM, AZ, CO, ND, SD, MT, WY, ID, AK, HI. For a shipping quote to these states please send us a message with your zip code.
336-870-2257
Video can be seen on the here:
XBC-6 Brush Cutter
Maximize your older/small skid steer with this newly designed brush cutter from Carolina Attachments. The same popular deck design as the XBC7 & XBC8, now available for machines with less hydraulic flow.
This is the perfect cutter for those older/smaller skid steers. Get large cutting capacity from your older/smaller skid steer. Using the high speed omni rc100(100hp) gear box to achieve the higher blade speeds needed to cut amd maintain blade tip speed on larger diameter material, this cutter fills the void left behind by others. Traditionally only brush cutters capable of smaller cutting capacity, 3" diameter and less, have been available in this flow range.
☆11-20gpm flow range
☆massive 6"+ diameter cutting capacity
☆easily cut up to 6" hardwoods
☆FULL 5' CUTTING PATH--66" WIDE DECK
☆extra large omni RC100 (100HP) gear box
☆built in relief valve protects the motor and spindle
☆extreme duty 6-bolt spindle
☆doubled 3/8" AR400 steel blade carrier
☆5/8" x 6" AR400 hardened steel blades
☆3 blade design with integrated blade balancing, resulting in zero
vibration
☆welded wire wrap protection ring, prevents wire from wrapping around the
spindle
☆4,000 psi Parker brand hydraulic hoses
☆fully welded deck seams
☆all bracing has open ends to allow water to pass through, and not buildup causing rust
☆slotted front guard allows for increased visibility and protection
☆slotted HD motor cover allows air flow around the motor for cooling
☆safety steps on both sides of deck
☆AR400 hardened steel inside runner, ads strength and deck life by reducing
wear
☆powder coated
☆1 year manufacturer's warranty
☆☆☆NO ADDITIONAL CHARGES FOR RESIDENTIAL DELIVERY!!! $299 FLAT RATE SHIPPING TO YOUR DOOR(lift gate delivery not included)☆☆☆
☆☆$299 SHIPPING DOES NOT APPLY TO SHIPPING TO THE FOLLOWING STATES: CA, WA, OR, ND, SD, MT, WY. PLEASE MESSAGE US FOR EXACT SHIPPING QUOTE☆☆
We can ship to most any address in the lower 48 states. There are no additional charges for residential delivery. Cutters can't be unloaded on a lift gate, you must be present and have your machine to unload. Trucking company will call and setup an appointment for delivery after the item has shipped. When ordering, please include all necessary shipping info (name, address and phone number)
☆☆☆FAQ'S☆☆☆
Does this brush cutter really cut 6" trees?
Yes! This cutter is rated from the manufacturer to consistently cut 6" diameter hardwood trees all day, every day! This is a commercially rated brush cutter, using a time tested and proven hydraulic motor and omni RC100 gear box setup. Many customers have reported cutting much larger trees with this cutter, but please keep in mind, the manufacturer rates and warrants this cutter for up to 6".
Will this brush cutter also cut grass and overgrown fields, and how well does it do compared to a 3 point rotary cutter?
Yes, this brush cutter will perform double duty, cutting larges trees and grass/overgrown fields. Many customers tell us they use one side of the bi-directional blades for trees and brush, and use the other side for grass/fields. This method keeps the side used for grass sharper for a longer period of time allowing the cutter to mow fields efficiently. This brush cutter leaves behind a clean cut comparable to that of traditional 3 point rotary cutters. In the picture that is in this ad of a path that was mowed threw an overgrown field, that hadn't been mowed in 2 years, a single pass was performed in thick & tall grass/weeds.
What is a case drain, and do I need one for this cutter?
This cutter does NOT require the use of a case drain line! A case drain is used on radial piston motors to relieve excess pressure within the motor. Again this cutter DOES NOT use a case drain line!
Does this brush cutter require high flow hydraulics?
NO! This is a standard flow brush cutter, NOT high flow. This cutter uses one of the widest flow ranges available of 11-20GPM.
I have a high flow skid steer, can i still run this brush cutter?
Yes! The cutter can still be ran on your high flow machine. High flow machines usually have one of the following, either separate hydraulic couplers, or a high flow option button inside the cab. To run this cutter, simply hook the hydraulic hoses into the standard flow couplers, or do not turn on your high flow option.
Can i sharpen the blades, and how or what method should I use?
Yes, the AR400 blades can be sharpened to give extended blade life! To sharpen the blades, you can rotate the blade to the front of the cutter, and swing it out, exposing it from the deck. Then use an angle grinder to re-sharpen. Simply hold the grinder at the same angle that the blade was originally sharpened to.
Where can I get replacement blades, and how much are they?
Replacement blades can be purchased from us, or direct from the manufacturer (Carolina Attachments, LLC). We keep replacement blade kits in stock at all times. There is an ad posted in out Ebay store for replacement blades. Blades can not be purchased from your local farm supply store, because they are cut in house by the manufacturer. Full replacement sets (3 blade cutters) are $225 plus shipping. Many customers buy an extra set of blades at the same time as the cutter, to save the added shipping cost of the blades.
What does the 1 year warranty cover?
The manufacturer warrants this cutter to be free from manufacturer defects for 1 year from the purchase date. This warranty covers, but is not limited to, all components excluding wear parts I.E(blades and hydraulic hoses).